PreSonus Eris E5 XT
Building upon the success of the original, the PreSonus Eris E5 XT Two-Way Active 5″ Studio Monitor offers the same robust connectivity options with an updated driver combo and a larger ported enclosure. The Hugh Sarvis designed EBM waveguide delivers a wider and more controlled sweet spot, ideal for group listening and collaboration. The E5 XT utilizes 80W Class-AB biamplification to power the 5″ woven composite woofer and 1″ ultralow-mass, silk-dome high-frequency driver, which combine to deliver up to 102 dB of continuous SPL
The Eris E5 provides a balanced XLR, a balanced ¼” TRS, and an unbalanced RCA line-level input. Dial in the acoustic tuning controls for a flattened frequency response and an accurate mixing contour. The acoustic controls on the rear panel include Level, HPF, LF-Trim, HF-Trim, and Acoustic Space. The PreSonus Eris E5 XT ships with a power cord. It is easy to feed audio to your Eris E5 XT studio monitors from an audio interface, mixer, monitor controller, or almost any other line-level source. Eris E5 XT monitors provide balanced XLR, balanced 1/4-inch TRS, and unbalanced RCA line-level inputs. You will have no problem hooking your Eris speakers up to virtually anything.
The Eris XT studio monitors is outfitted with a new EBM (Elliptical Boundary Modeled) wave guide designed by none other than Hugh Sarvis of WorxAudio, the mind behind our award-winning CDL loudspeakers and lauded R-Series monitors. The result? A superior high-frequency response and wider 100-degree horizontal dispersion to create a broader sweet spot. It is ideal for group listening and collaboration‚ while narrow vertical dispersion reduces reflections from your desk. Silk-dome tweeters ensure snappy, accurate transient reproduction.
Features:
- 5.25-inch woven composite low-frequency transducer and 1-inch (25 mm), ultra-low-mass, silk-dome, high-frequency transducer
- 100˚(H) x 60˚(V) EBM waveguide for wide sweet spot
- Front-firing acoustic port for superior bass-frequency reproduction and optimized, resonance-suppressing internal bracing
- 70 watt, Class AB amplification
- 102 dB maximum continuous SPL, with 48 Hz to 20 kHz frequency response
- Acoustic Tuning controls: HF (±6 dB, continuously variable); Midrange (±6 dB, continuously variable), and Acoustic Space (flat, -2, -4 dB), plus highpass filter (Off, 80 Hz, 100 Hz)
- RF interference, output current limiting, over-temperature, transient, subsonic protection and amplifier “soft start” feature (eliminates popping on power-up)
- Internal power supply with IEC connector and power switch with on/off LED
- Balanced XLR and ¼-inch inputs and unbalanced RCA inputs
- Studio One™ Prime and Studio Magic Software Suite
Related Products
PreSonus Eris Studio Monitors Features:
- 4.5-inch, woven-composite, low-frequency transducer
- 1-inch (25 mm), ultra-low-mass, silk-dome, high-frequency transducer
- 50W (25W/side) Class AB amplification
- Bluetooth 5.0 wireless stereo input
- RCA and ¼-inch balanced TRS rear-panel inputs
- Front-panel 1/8-inch stereo Aux In for use with mobile audio devices
- Integrated headphone amplifier with front-panel stereo 1/8-inch jack
- High- and low-frequency controls let you fine-tune the speaker’s response
- Front-panel Volume control
- Rear-firing, round bass-reflex port
KRK Rokit M6 Studio Monitor
When it comes to professional audio monitoring and sound engineering, having the right tools is crucial. One such tool that has gained significant popularity among audio enthusiasts and professionals is the KRK Rokit M6 Studio Monitor. With its exceptional audio quality, balanced sound, and advanced features, the KRK Rokit M6 offers an unparalleled listening experience. In Kenya, AudioCom is the go-to destination for audio equipment, including the KRK Rokit M6 Studio Monitor. In this article, we will delve into the features, benefits, and overall performance of the KRK Rokit M6 Studio Monitor, while highlighting AudioCom Kenya’s role in making this exceptional speaker system available to consumers.
High-performance drivers and mounting system
6.5″ cone woofer, 1″ dome tweeter
Large magnets in an Advanced Magnetic Circuit design
Built-in bi-amplification: 60W LF, 35W HF
Dedicated power amps are perfectly matched to the woofer and tweeter
Enclosure is designed to kill unwanted resonances that can influence sound
Room-control and high-trim response controls give you optimum response in any room
About the item
The Mic Stand is a microphone stand designed for floor and tabletop use. The stand offers a height-adjustment range of 11.2 to 15.75″, using a boom arm measuring 12.2″ in length that helps you close-mic sources like guitar amplifiers or vocals (in a tabletop setting).
The flat, unobtrusive base saves space, while four elastic rubber feet on the base fight against the sonic issues associated with coupling.
The boom arm adjusts with a wingnut, while a clutch facilitates height adjustments. The stand is constructed out of steel and features a two-piece folding design. At the end of the stand, you’ll find a 5/8″ thread that fits standard microphone mounts.
M-Audio BX6 Carbon Compact studio monitors
The M-Audio BX-6 Carbon is an active studio monitor featuring a 6” woven Kevlar woofer, 1.25” silk-dome tweeter, a bi-amplified 130 watt class A/B design and a unique Acoustic Space Control feature that lets you calibrate the monitor to your mixing environment.
Behringer HA 400 Headphone Amplifier allows everyone to listen in, and control the volume of his or her own headphones.
PreSonus Eris E8 XT Studio Monitor
The PreSonus Eris E8 XT Monitor is a powerful and accurate studio monitor designed for professional audio production. With its extended frequency response, robust construction, and flexible connectivity options, it delivers precise and detailed sound reproduction for critical listening and mixing applications.
The PreSonus Eris E4.5 BT speakers deliver studio-quality sound with the convenience of Bluetooth® wireless technology.
Nearfield Studio Monitor Features:
- Versatile nearfield studio monitor that’s great for any style of music
- 8″ Kevlar/aramid composite woofer delivers clear mids and tight bass response
- Soft-dome tweeter with proprietary waveguide provides smooth and lucid highs up to 30kHz
- Active 2-way electronics provide high-headroom/low-noise amplification
- High- and low-frequency controls let you contour your sound to your environment
- Front-slotted bass port and resonant-free cabinet increase sonic clarity
- Radiused edges and contoured front baffle provides clear sound and accurate stereo imaging
- System optimized limiter prevents unexpected peaks from damaging speakers
The M-Audio® BX studio monitor series is trusted by more musicians and recording professionals than any other. Now, the BX5 D2 monitors extend the bestsellers’ legacy* with an elegant new design inside and out. We leveraged technology from our high-end monitors to extend the frequency response and provide an even more natural listening experience. Custom Class A/B analog amplifiers deliver superior dynamics and tonal accuracy across the frequency spectrum—while the latest-generation woven Kevlar low-frequency drivers and waveguide-loaded silk dome tweeters provide rich, defined sound. With the BX5 D2, you’ll enjoy the utmost accuracy in an engaging listening experience.
The HS8 Powered Studio Monitor from Yamaha is a bi-amplified monitor that is designed for accurate sound reproduction.
Key Features
- 5″ Woven Kevlar Woofer
- 1″ Silk Dome Tweeter
- Class-AB Amplification
- 40W of LF Power, 30W of HF Power
- Waveguide with LED Placement Cues
- Acoustic Space Control
- 56 Hz to 22 kHz Frequency Response
- XLR and 1/4″ TRS Input Connectors
- Multiple Points of Protection